- 9050 Touch Professional Ultrasonic Cleaner
- Product Information
- Specifications
- Product Usage Instructions
- Step 1: Preparation
- Step 2: Filling the Tank
- Step 3: Setting the Controls
- Step 4: Placing Items for Cleaning
- Step 5: Starting the Cleaning Process
- Step 6: Drainage and Drying
- FAQ
- Q: Can I use special cleaning solutions with the Professional
- Q: Is the Professional Ultrasonic Cleaner safe to use around
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
9050 Touch Professional Ultrasonic Cleaner
Specifications
Tank capacity: 7.5 L / 2.0 gallon
Tank size: 33.1 x 23.8 x 10.5 cm / 13.0 x 9.4 x 4.1
Large stainless steel tank
Touch Screen Control Panel
Drainage valve
3 x industrial grade ultrasonic transducers
3 x ceramic heaters
3 x colour LED display
Independent control circuit for each ultrasonic transducer
Multiple circuit protectors
Moisture-proofed PCB with industrial IC
3 x cooling fans
Solid and advanced structural design
Glass top panel with capacitive sensing technology
Durable, reliable, resistant to water and harsh chemicals
Convenient to use
Uniform distribution of ultrasonic waves, strong cleaning, high
durabilityMounted underneath the bottom of the tank for safe and even
heating; more durability constructionEasy to operate, with 4 key control panel, 6 timer settings, 3
temperature settings40% higher efficiency, not susceptible to interference, more
durableCapable for different working environments with better
anti-interference performanceTwo cooling fans for PCB boards, one for cooling of ultrasonic
transducers4.5mm thick wall housing made from engineering grade plastic
with tongue and groove design for better water-proof and dropproof
performances60% quieter than steel housing designs
Product Usage Instructions
Step 1: Preparation
Before using the Professional Ultrasonic Cleaner, review the
user manual for instructions and safety precautions. Ensure that
the device is placed on a stable surface and away from
children.
Step 2: Filling the Tank
Open the drainage valve and fill the stainless steel tank with
tap water. In most cases, special solutions are not necessary for
cleaning.
Step 3: Setting the Controls
Use the Touch Screen Control Panel to set the desired cleaning
parameters. The control panel features a 4-key interface, allowing
you to adjust the timer settings (6 options) and temperature
settings (3 options).
Step 4: Placing Items for Cleaning
Place the items to be cleaned into the tank, ensuring they are
fully submerged in water. Avoid overloading the tank to ensure
optimal cleaning efficiency.
Step 5: Starting the Cleaning Process
Press the start button on the control panel to initiate the
ultrasonic cleaning process. Millions of tiny air bubbles will be
generated within the liquid by high frequency vibration, dislodging
debris and achieving a thorough cleaning effect.
Step 6: Drainage and Drying
Once the cleaning process is complete, open the drainage valve
to remove the water from the tank. Allow the items to dry before
removing them from the cleaner.
FAQ
Q: Can I use special cleaning solutions with the Professional
Ultrasonic Cleaner?
A: In most cases, tap water is sufficient for cleaning. Special
solutions are not necessary.
Q: Is the Professional Ultrasonic Cleaner safe to use around
children?
A: The appliance can be used by children aged 8 years and above
under supervision. Cleaning and user maintenance should not be
performed by children unless they are aged 8 years and above and
supervised. Keep the appliance and its cord out of reach of
children aged less than 8 years.
15/05/114-V1
Professional Ultrasonic Cleaner
User Manual
Features
Large stainless steel tank
Touch Screen Control Panel
Drainage valve 3 x industrial grade ultrasonic transducers 3 x ceramic heaters
3 x colour LED display
Independent control circuit for each ultrasonic transducer Multiple circuitprotectors
Moisture-proofed PCB with industrial IC 3 x cooling fans
Solid and advanced structural design
Tank capacity 7.5 L / 2.0 gallon; Tank size 33.1 x 23.8 x 10.5 cm / 13.0″ x9.4″ x 4.1″
Glass top panel with capacitive sensing technology. Durable, reliable,resistant to water and harch chemicals
Convenient to use
Uniform distribution of ultrasonic waves, strong cleaning, high durability
Mounted underneath the bottom of the tank for safe and even heating; moredurability construction
Easy to operate, with 4 key control panel, 6 timer settings, 3 temperaturesettings
40% higher efficiency, not susceptible to interference, more durable
When overloaded or improperly used, the protectors shut down the power tocertain areas to protect the machine
Capable for different working environments with better anti-interferenceperformance
Two for cooling of PCB boards, one for cooling of ultrasonic transducers.Improve heat dissipation and beneficial for continuous operations
4.5mm thick wall housing made from engineering grade plastic with tongue andgroove design for better water-proof and dropproof performances. 60% quieterthan steel housing designs.
SAMPLE APPLICATIONS
JEWELLERY
PERSONAL ITEMS
MEDICAL / DENTAL
Necklaces, rings, earrings, bracelets, etc.
PRECISION PARTS
Shaver heads, hairdressing scissors & combs, etc.
SILVER, COPPER OR BRASS
Surgical instruments, pliers, handpieces, etc.
BABY ITEMS
Bearings, gears, valves, tools, fuel injectors, etc.
LAB ITEMS
Silverware, silver, copper or brass decorations, etc.
BRASS, GUN PARTS
Toys, baby items, speech therapy tools, etc.
PCB, INKJET CARTRIDGES
Test tubes, beakers, flasks, etc.
GOLF CLUBS
Reusable brass, gun parts, etc. ELECTRICAL PARTS
PCBs from mobile phones and MP4, ink cartridges, etc.
CRYSTALS
Golf clubs and golf balls
Terminals for relays and contactors
2
Crystals
INTRODUCTION
Use tap water. Special solutions are not necessary in most cases.
Principles of ultrasonic cleaning: Millions of tiny air bubbles are generatedwithin liquid by high frequency vibration. The air bubbles burst when incontact with object and dislodge the debris to achieve the cleaning effect.
· Using tap water is sufficient. Purified water or distilled water has thesame cleaning effect as regular tap water for ultrasonic cleaning.
· When cleaning silver or copper items where oxidation has darkened the items,special solutions such as SeaClean2, needs to be added to the water to removethe oxidation.
Main Features
· 7.5 L / 2.0 gallon tank capacity. Tank opening 33.1 x 23.8 x 10.5 cm / 13.0″x 9.4″ x 4.1″. Longest item that can fit inside the tank is 37.0 cm / 14.6″.
· 3 x industrial grade ultrasonic transducers 3 x (55~60)W = (165~180)W, 3 xceramic heaters 3 x (75~80)W = (225~240)W.
· 3 x colour LED display. 4-key controls, 6 timer settings, 3 temperaturesettings, simple to operate. · Control panel with capacitive sensingtechnology, durable, reliable, resistant to water and harsh chemicals ·Electrical circuit features:
- Three transducers, each has an independent PCB control. The output power isincreased by 40%. 2) Multiple circuit protectors: a) Thermal switch to preventrunning dry. If temperature is too high, the switch cuts off power forapproximately 6 minutes then reconnects the power. b) Thermal protector toprevent PCB from overheating due to overload. c) Timer to prevent heater fromrunning continuously. · Industrial grade IC. Moisture-proofed PCB. Coolingfan. · Drainage valve.
Read the Manual First
The manual should be carefully reviewed before starting to use the device.Warnings should be observed carefully. Please follow the manual foroperations.
TABLE OF CONTENTS
Sample Applications —————————————————————————————————– 2 Safety Precautions—————————————————————————————————– 4, 5 Items Not Suitable for UltrasonicCleaning —————————————————————————- 5 Product Detail———————————————————————————————————— 6 Control Panel and Operations—————————————————————————————— 7 Applications———————————————————————————————————- 8,9 Common Cleaning Methods————————————————————————————— 10, 11 Operation Guidelines———————————————————————————————– 12, 13 Care and Maintenance————————————————————————————————- 14 Optional Accessory Usage Guide————————————————————————————- 15 Specification———————————————————————————————————— 16
3
SAFETY PRECAUTIONS
Keep it away from children!
This appliance can be used by children aged from 8 years and above if theyhave been given supervision or instruction concerning use of the appliance ina safe way and if they understand the hazards involved. Cleaning and usermaintenance shall not be made by children unless they are aged 8 years andabove and supervised. Keep the appliance and its cord out of reach of childrenaged less than 8 years.
· Please store the ultrasonic cleaner where it is inaccessible by children.
· Danger to children! Danger for death through suffocation! Keep packagingmaterial away from children.
· This appliance should not be used by children. Keep the appliance and itscord out of reach of children.
To prevent life-threatening electrical shock, please observe the following:
Danger of electrical shock! Do not use while bathing. Never immerse the deviceor the power cord in water or other liquid.
Danger of electrical shock! Never touch the power plug with wet hands,especially when inserting or removing the plug.
Danger of electrical shock! If the unit has fallen into water duringoperation, do not touch the unit. Remove the power plug from the socket first.
Danger of electrical shock! Do not spray water or liquid over the device.
· Never operate the device unattended.
· Follow the manual to operate the device.
· Do not use components unapproved by the manufacturer.
· When removing the power cord from the socket, grab the power plug not thecord.
· To protect the power cord from damage, do not cause it to get caught bythings such as cupboard door or a chair leg; do not drag across a hot surface.
· If there is damage to the power plug, cord, housing, or other parts of thedevice, do not use the device.
· Do not disassemble the device, except by professionals.
· If the unit is damaged, non-operational or has fallen into water, take it toa qualified service provider.
· Remove the power plug from the socket:
-if malfunction occurs -before cleaning the device -if the device is not being used for prolonged period -after each use (recommended)
· The installation of an earth leakage circuit breaker with a rated trippingcurrent of no more than 30 mA provides further protection against anelectrical shock. The installation should only be carried out by a trainedelectrician.
To prevent fire hazards, please observe the following:
· Never block the vents on the device. Keep the vents free from lint, hair andother materials.
· Do not place the device on a soft surface, such as a bed or a couch, wherethe vents could be blocked.
· Observe the warnings in all sections.
· If the supply cord is damaged, it must be replaced by the manufacturer orits service agent or a similarly qualified person in order to avoid a hazard.
CAUTION
Risk of fire and explosion! · Never use flammable liquids or solvents directlyin the
ultrasonic cleaning bath. Alcohol, acids and solvents should be used in an In-direct tank. · Ultrasonic activity increases the vaporisation of liquids andcreates a very fine mist which can catch fire.
Caution! · Avoid any acetone, acid, alcohol, amonia or solvents
from contacting the plastic housing and control panel to prevent corrosion.Use Indirect Cleaning and a glass or metal container for using such solutions.
Risk of damage to the ultrasonic tank! · Do not use any acid cleaning agents(pH value < 7)
directly in the stainless steel tank if the cleaning items or thecontamination of the cleaning items contain halogenides (fluorides, chloridesor bromides). The same applies to NaCl solutions. · The stainless steel tankcan be destroyed by crevice corrosion in a very short time. Substances thatcause crevice corrosion can be contained in household cleaners.
4
SAFETY PRECAUTIONS
Other observations:
· Do not operate the product without filling the tank with water. Running drywill damage the unit. · Do not plug in the power cord before adding water tothe tank. To avoid overspill, do not fill the tank above
the `Max’ line. · Do not use solution containing abrasive substances or strongcorrosive chemical solution not
recommended by the manufacturer or the supplier. · Place the device on a dryand flat surface for operation. · When the device is subjected to severeelectromagnetic interference, it may malfunction, stop operating or
lose control functions. If this happens, unplug the power cord then re-insertit to restart the device.
IMPORTANT SAFETY INSTRUCTIONS
When using electric appliances, basic precautions should always be followed,including the following :
· Read all the instructions before using the appliance. · To reduce the riskof injury, close supervision is necessary when an appliance is used nearchildren. · Only use attachments recommended or sold by the manufacturer. · Donot use outdoors. · To disconnect, turn all controls to the off (O) position,then remove plug from outlet. Do not unplug by pulling
on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when notin use and before servicing or cleaning. · To reduce the risk of electricalshock, do not put the appliance in water or other liquid. Do not place orstore appliance where it can fall or be pulled into a tub or sink. · Allservicing of this product, including transducer replacement, is to beconducted by qualified service personnel. · Do not operate any appliance witha damaged cord or plug, or after the appliance malfunctions or is dropped ordamaged in any manner. · Return appliance to the nearest authorized servicefacility for examination, repair, or electrical or mechanical adjustment.
Items Not Suitable for Ultrasonic Cleaning
Soft Jewellery: Pearls, emerald, ivory, coral, agate, sea turtle shells, etc
These items are not hard, so scratches may occur during cleaning.
Welded, Plated and Glued Items:
Ultrasonic cleaning may enlarge the gaps inside the welded joints,
Welded or plated metal items, glued items plated coating or glued items andmay cause separation.
Watches:
Because the strong penetration capability of the ultrasonic waves, water mayget into the watches.
Others: Wood; coated glass, ceramic, camera filters with pre-existing cracks.
Ultrasonic cleaning may enlarge the cracks pre-existed in the coating on theglasses, ceramic, and glass. If the items have no pre-existing cracks, then itis okay.
5
PRODUCT DETAIL
A
B
E
C
F D
G
H I
J
A. Top cover B. Handles C. Stainless steel tank D. Housing E. Control panel
F. Drainage pipe fitting G. Drainage valve handle H. Cover holder I. Powerswitch J. Power socket
INCLUDED ACCESSORIES
Power Cord
Stainless steel rack and tray
Hose OPTIONAL ACCESSORIES
Suspendible Basket
Double Beaker and beaker holder
6
Indirect cleaning tank
CONTROL PANEL AND OPERATIONS
Working Time Display. It counts down after work has started.
Multistage Thermometer.
Solid green light indicates that the water temperature is
0-30% of the set temperature.
Solid orange light indicates that the water temperature is 30-60%
of the set temperature. Solid red light indicates that the water temperatureis 60-90% of the set
temperature. Flashing red light indicates that the water temperature is closeto the set temperature.
All lights on, indicate that the water temperature is at the set temperature(90-100%).
Set Temperature Display. Press Temp button to select one of the 3 settemperatures.
50°C or 122°F 55°C or 131°F 60°C or 140°F
4. °C or °F Indicator. °C – Set temperature in °C. ° F – Set temperaturein °F.
5. Overheat protection warning light. If the unit is working improperly orhas been running for too long, the red warning light will illuminate,indicating that the unit is in overheat protection mode. The unit can not beoperated until it has been left to stand (~15 to 20 mins) to cool down. Thewarning light then turns off and the operation can be resumed.
6. Heater Status. Press Heater button, flashes, indicating the heater isturned on. Press Heater button again, dims, indicating the heater is turnedoff.
7. Normal Cleaning Status. Illuminated, normal cleaning is underway.
8. Heater Button. Pressing heater button, flashes, indicating that the heateris turned on. To cancel heating, press heater button twice again, dims,indicating the heater is turned off.
To prevent accidentally turning on or off the heater, the Heater button needsto be touched twice within 6 seconds to turn it on or off. flashes, indicatingthe heater is on.
When the water reaches the set temperature, the heater will turn offautomatically.
9. Temperature Set Button. 3 set temperatures (°C/°F) can be selected. PressTemp button to select one of the 3 set temperatures. 50°C or 122°F 55°C or131°F 60°C or 140°F
10. Function Button. After powering on, the LED displays
which is the default time (as
shown), and the unit is ready for normal working status. Press On/Off buttontwice and the
cleaning starts. The cleaning stops when the timer counts down to
. If the unit needs to
be stopped before the timer runs out, press On/Off button twice.
To prevent accidentally turning the unit on or off, the On/Off button needs tobe touched twice within 6 seconds to turn it on or off. flashes, indicaes thatthe unit is running in Normal Cleaning mode.
11. Timer Quick Set Button. Press Timer button, LED display shows time by 5minutes.
. Each pressing increases the
7
APPLICATIONS
1. Metal Processing Manufacturers and Jewellery Makers: – Ultrasonic cleaningcan remove grease or abrasive powder from work-inprocess metal items and keepthem clean. – Jewellery made with investment casting often has wax layer inaddition to debris. Turning on the heater will raise the water temperature,melt the wax and improve the cleaning.
2. Biology, Chemical Laboratories: Labs can use ultrasonic cleaners to cleantest tubes and other glass or metal containers to remove residual chemicalsand debris that can affect the accuracy of the test results.
3. Medical Instrument Disinfection Rooms: Non-disposable medical instrumentsmay have blood or organic tissues left after use. They need to be removed withultrasonic cleaners before disinfection.
4. Dental Clinics: Dental clinics can use ultrasonic cleaners to clean dentalinstruments and to remove blood and small particles left on the instrumentsbefore disinfection.
5. Electrical Component Manufacturers: Terminals on AC contactors and relaysneed to be kept clean to prevent sparking and non-contact. Ultrasonic cleaningis the most effective method to keep these parts cleaning.
6. Shooting Clubs To reuse brass cartridges: Adding special solution such asSeaClean2 solution can make fired brass casings useable and like new again.Gun cleaning and care: Cleaning guns after shooting is time consuming. UsingSeaClean2 solution in the water and using ultrasonic cleaners can complete thecleaning better, quicker and easier than traditional methods.
8
APPLICATIONS
7. Special Education Institutes / Kindergartens: Speech therapy tools orsmall toys that are reused need to be cleaned to prevent the growth and spreadof bacteria. Ultrasonic cleaning can perform thorough cleaning by removingdebris hidden inside small holes and crevices before disinfection.
8. Golf Clubs: Cleaning the heads of golf clubs is a time consuming job.Using ultrasonic cleaning with the Enhanced Cleaning method can improve theeffectiveness and efficiency.
9. Mobile Phone and Electronics Service Shops PCB renewal: Non-operationalelectronics, after falling into water, or non-operational key pads can becleaned with ultrasonic cleaners and pure alcohol to recover the functions.Use the Indirect Cleaning method for small-sized PCBs.
10. Printing Shops Unblocking dried printer heads or ink cartridges: Largeprinters and inkjet printers often have dried printer heads or ink cartridgeports. Replacing them with new ones is very costly. Adding acetone orSeaClean2 and using an ultrasonic cleaner with a couple of minutes of cleaningwill remove the blockage and make them usable again. Avoid acetone fromcontacting the plastic housing to prevent corrosion. Use Indirect Cleaningexplained later and a glass or metal container for acetone.
11. Automotive Repair Shops: The Enhanced Cleaning method can be used toclean precision parts such as valves, injectors, gears and bearings. It cleansout debris in tiny holes and crevices effectively.
9
COMMON CLEANING METHODS
REGULAR CLEANING
Only tap water is needed.
Suitable Locations: Jewellery makers, biology / chemical labs, homes, speechtherapy clinics, dental clinics, automotive repair shops.
Cleaning Method: 1. Put the items to be cleaned inside the basket and put thebasket inside the tank. 2. Add water to the cleaning tank to a level between“MIN” and “MAX” lines and above the area to be cleaned. 3. Turn the powerswitch on. Press Time button to set the timer to 5 – 10 minutes. Press On/Offbutton to start cleaning.
Notes on using the basket: 1. The basket reduces the friction between theitems and the tank. Stainless steel tray absorbs
approximately 8% of ultrasonic energy and a plastic basket absorbs about 35%of ultrasonic energy. This significantly reduces the cleaning effectiveness.2. During cleaning, dirt will come off like smoke and the water will becomemurky over time. When “smoke” stops coming, the cleaning is basically done.
INDIRECT CLEANING
Put the items in a separate container. Use ultrasonic waves to penetrate thecontainer to do the cleaning.
Suitable Locations: medical instrument sterilization rooms, watch andprecision parts manufacturers, mobile phone and electronics service shops,large printing shops.
Different industries use different fluids inside the container:
1. Watch service shops – Watch oil (to prevent rust) 2. Medical instrumentsterilization – Enzymatic solution (cleaning prior to sterilization) 3.Precision electrical parts – Hexane (to dissolve grease, to evaporate quickly)4. Mobile phone and electronic service shops – Pure alcohol (to evaporatequickly). 5. Printing shops Acetone is often used (to dissolve ink)
Avoid any acetone, acid, alcohol, amonia or solvents from contacting theplastic housing and control panel to prevent corrosion. Use Indirect Cleaningand a glass or metal container for using such solutions.
Cleaning Method: 1. Put the item inside a container. Add proper fluid tosubmerge the area to be cleaned. 2. Place the container in the tank directly.Add water to a level between “MIN” and “MAX”, do not overflow. 3. Turn thepower switch on. Press Time button to set the timer to 10 minutes. PressOn/Off button to start
cleaning. Ultrasonic waves will penetrate the container and clean the items.
Selection of container: (Adding a container to the tank will reduce thecleaning effect by the following)
Container Type: Ultrasonic energy absorption:
Plastic 30-40%
Aluminium 20%
Glass 15%
Stainless Steel 8%
190
ENHANCED CLEANING
Debris accumulated over a long period of time, greasy or heavily soiled.
Suitable Locations: metal processing and jewellery makers, hardwaremanufacturers, shooting clubs, automotive repair shops.
Cleaning Method: 1. Large items can be put in the tank directly. Small itemscan be put in the basket, then put in the tank. To avoid rubbing duringcleaning, do not put the items on top of each other.
2. Add water to a level between “MIN” and “MAX” and above the area to becleaned.
3. Add 50 ml (3 tablespoons) of washing up liquid.
4. Turn the power switch on. Press Temp button tto set the
water temperature to 55°C (131°F). Press Heater button to turn on the heater,flashes. Close the lid.
LED
lights up. When water reaches the set temperature, dims, indicating the heateris turned off.
Warm water and dishwashing liquid can soften grease and improve cleaningefficiency.
5. Press Time button to set the timer to 15 minutes. Press On/Off button tostart cleaning. Grease will dissipate and appear to be like black smoke in thewater. 6. When it stops, open the drainage valve to release the dirty water.Close the valve afterwards.
7. Clean the tank and add fresh water. Wash the items for another 3 minutesto remove the residual debris and any detergent.
SPECAL CLEANING WITH SEACLEAN2
Gold, silver, copper or brass items with oxidation which has darkened theitems will need special cleaning.
Suitable Locations: gold, silver, copper or brass product manufacturers,shooting clubs.
Cleaning Method: 1. Put the items in the basket and then in the tank, addwater to a level between “MIN” and “MAX” and above the area to be cleaned.
2. Add special solution (SeaClean2) that can remove silver or copperoxidation according to the ratio recommended (typically 1:10), Use specialsolutions according to the instructions for brass cartridges.
3. Turn the power switch on. Press Temp button to set the
water temperature to 50°C (122°F). Press Heater button to turn
on the heater, flashes. Close the lid. LED
lights up
indicating the percentage range of the set temperature being
reached. when the water reaches the set temperature,
dims, indicating the heater is turned off.
The heater has dual protection. To ensure safety, the heater will turn offautomatically after 50 minutes.
4. Press Time button to set the timer to 15 minutes.
5. When cleaning is done, remove the basket and the items. Rinse the itemswith tap water or follow steps 6 and 7 in the Enhanced Cleaning section.
During cleaning, debris will come off the items like “smoke”. Water willbecome murky. This method will remove silver or copper oxidation and debris inthe decorating patterns and crevices and make the items like new again.
11
OPERATING GUIDELINES
1
Remove the cover and put it on the cover holder vertically. Put the items inthe basket then put them in the cleaning
tank. Add water to a level between “MIN” and “MAX” and
above the area to be cleaned.
If the unit is turned on without water, ultrasonic energy will not beabsorbed. This model has high power and once on for over 15 seconds, it maydamage the unit or severely reduce the life of the unit.
2
Connect the power cord to an outlet and turn the
switch on. LED display shows
. This is the
most common timer setting. If the timer needs to
be adjusted, press Time button. Select desired
timesetting by pressing Time button:
10min – 15min – 20min – 25min – 30 min – 5 min
Prolonged cleaning time may result in: a. Loosening of the screws if used. b.If items are plated and have existing cracks, the
cracks may become more pronounced. c. Coatings with pre-existing damages mayexperience
more peeling.
3 Press On/Off button to start cleaning.
During cleaning, buzzing sound can be heard from the cleaning tank, indicatingthat the cleaning is underway. Closing the lid will reduce the noise level.
The digital timer will count down to show the remaining
cleaning time. When it displays
, the cleaning is done.
To stop cleaning at any time, press On/Off button.
The unit is designed with overheating protection.
If the unit has been running for too long, the red warning light ‘ will illuminate, indicating the unit is in overheat protection mode. The unit can not be operated until it has cooled down (~15 to 20 minutes). The ‘ turnsoff and the operation can be resumed
12
4
Select one of the four cleaning methods recommended earlier.
1. When the heater is needed, press the Temp button to select one of the 3preset temperatures. Press Heater
button, flashes, indicating the heater is turned on.
When the water reaches the set temperature, dims, indicating the heater isturned off.
To ensure safety, the unit is designed with dual protection. The heater willbe turned off automatically if it has been running for 50 minutes.
30~60% 90~100%
0~30%
60~90%
Thermometer lights up to indicate the percentage of the set temperaturereached.
2. When debris “smoke” is no longer visible, cleaning is done. If additionalcleaning is needed, reset the timer and repeat the steps above.
5
When cleaning is completed, switch off the power, open the cover and retrievethe basket and the items.
Connect the drainage hose to the drainage pipe as shown.
Open the drainage valve to drain the dirty water.
Clean and wipe the tank dry.
Close the drainage valve.
DOUBLE STRENGTH CONCENTRATE
Made from a unique formula containing natural products, mixing carefullybalanced quantities of seaweed, coconut oils and fruit extracts to create apowerful cleaning solution.
SeaClean2 will expertly clean tarnished items and assist in the removal ofcarbon, rust and dirt from most solid metals, precious stones and inkjetcartridges to return them to a shiny condition.
Available in 500ml, 1L, 5L and 25L bottles.
- Please refer to our website for exclusions.
13
CARE AND MAINTENANCE
1
Do not turn on the unit without water in the tank. Even though the unit isdesigned with multiple protections, if it is turned on
for over 30 seconds without water in the tank, it may damage the unit or
severely reduce the life of the unit.
If heating over 3 minutes, it will damage the heater.
This unit is equipped with a thermal cutoff. If the cleaning function isturned on without water in the tank, the temperature will rise continuously.The thermal cutoff will be actuated after approximately 15 minutesrespectively to ensure safety. The unit will be disabled until it is repaired.
2
Do not run the unit for extended time or continuously. The unit is designedwith overheat protection. If the unit has been running
for 45 minutes, it is recommended to stop the unit for about 20 minutes to
prolong the life of the unit.
3
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, open the drainage valve to drain the dirty
water. Clean and wipe the tank dry.
4
Do not spray water over the housing. Use a towel to wipe the tank and thehousing dry.
Avoid any acetone, acid, alcohol, amonia or solvents from contacting theplastic housing and control panel to prevent corrosion. Damage to the machinein this manor will void warranty.
5
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.
14
OPTIONAL ACCESSORY USAGE GUIDE
PLASTIC BASKET The basket has foldable handles. It can be raised and suspendedabove the water to drain.
STAINLESS STEEL RACK AND TRAY
The rack can be used to support cassettes. 2 layers of cassettes can be usedon top of each other. The tray can be used in place of the cassette. The trayis stackable so multiple layers of trays can be used.
INDIRECT CLEANING TANK
Place the indirect cleaning tank across the top of the main cleaning tank asshown. Add water inside the main tank so the water level reaches the indirectcleaning tank. Add required special’ solution to the indirect cleaning tank and clean items inside. Cleaning efficiency can reach 90% inside the Indirect Cleaning Tank due to our technology and quality. It can be used to isolate the cleaning and the solution from the main cleaning action. It also reduces the amount ofspecial’ solution needed.
BEAKER AND BEAKER HOLDER – INDIRECT CLEANING
Put the beaker holder and beaker(s) across the main cleaning tank as shown.
Add water to the main tank so the water level reaches the beaker(s).
Add required solution into the beaker(s). It can be used to clean small itemssuch as dental burs, files and nozzles.
15
SPECIFICATIONS
Description Model Tank Capacity
Tank Size Longest Item Fits inside Tank Power Supply Digital Timer Settings
Professional Ultrasonic Cleaner
9050 TOUCH
7.5 L /
Max. 6.0 L / 1.6 gallon (US)
2.0 gallon (US)
Min. 4.3 L / 1.1 gallon (US)
33.1 x 23.8 x 10.5 cm / 13.0″ x 9.4″ x 4.1″
37.0 cm / 14.4″
410 W (AC 220~240V 50/60Hz)
10min 15min 20min 25min 30min
5min
Drainage Ultrasonic Frequency Tank Material Housing Material Net Weight GrossWeight Unit Size
Drainage valve 35,000 Hz Stainless Steel SUS304 ABS 9.8 kg / 21.8 lb 11.1 kg /24.7 lb 54.1 x 33.7 x 27.7 cm / 21.3″ x 13.3″ x 10.9″
GUARANTEE
Your Ultrasonic Cleaner has been carefully manufactured and 100% tested usinghigh quality assured components. It is guaranteed against faulty workmanshipand materials for a period of 12 months from the date of purchase. In theunlikely event that a failure should occur, the unit will be repaired orreplaced free of charge when returned, postage paid, to the address belowwithin the guarantee period. This guarantee DOES NOT include damage or failureresulting from misuse, damage in transit or failure by the user to comply withthe Dos and Don’ts (this list is not exhaustive). Your statutory rights undercommon law are in no way affected by this guarantee.
James Products Ltd, Church Close Business Park, Todber, Sturminster Newton,Dorset DT10 1JH, England Tel: +44 (0)1258 820100 Fax: +44 (0)1258 820550Email: sales@jamesproducts.co.uk
When returning your unit please call our Returns Department on +44 (0)1258820100 for a RMA (Returns Materials Authorisation) number. Please return yourunit in its original packaging along with a covering letter stating when andwhere you purchased the unit and a description of the problem encountered. Ifthe unit is within the guarantee period please enclose proof of purchase.
LIMITED WARRANTY Consequential and incidental damages, including withoutlimitation, loss of property and those arising from breach of any express orimplied warranty, are not the responsibility of James Products Limited and tothe extent permitted by law, are excluded.
In accordance with its policy of progressive product design, James ProductsLtd reserves the right to change product specifications without prior notice.
Repair or replacement is at the discretion of the manufacturer.
www.jamesproducts.co.uk
Registered in England No. 5250754 Registered Office: James Products Ltd,Church Close Business Park, Todber, Sturminster Newton, Dorset DT10 1JH,England
References
Read User Manual Online (PDF format)
Loading......
